07-26-2009 07:24 PM
Every time I open ACT10 I get the following prompt:
"For added functionality, fill out the Windows Phone information dialog"
I've tried to comply, but the problem persists. I would be most grateful for a solution to end this nag screen.
07-28-2009 07:59 AM
Note: Effective 6/1/13, Sage no longers provides support for the Act! software. This is now provided by Swiftpage.
07-28-2009 01:08 PM
Hi, thanks for the suggestion. The dialer is not enabled in preferences.
I did enable and then disable following your advice but no change I'm afraid, so the problem remains.
07-29-2009 05:36 AM
Windows XP Service Pack 3 has been out for over a year now being pushed as a Critical Update via Microsoft update. Any reason you have not updated? Just asking.
Can you open Hyperterminal under the Communications program group of XP, and does it also prompt you?
07-29-2009 03:27 PM
Thanks Matthew for coming back with some ideas.
Yes Hypertermianl opens fine and I was able to use it to dial a number OK and have the phone ring.
I have got SP3 on another machine (does not have ACT installed on it) and I have just now installed SP3 on the ACT machine, but the problem remains.
08-22-2009 01:50 PM
08-22-2009 02:48 PM
No, nothing more than you read here.
Because the problem happens everytime I run ACT, and has done so for over two years, it has become so tiresome that I am on the verge of abandoning ACT althogether and look for another Contact Management Solution.
I had hoped that posting here might have led to a solution, but unfortunately not.
08-24-2009 09:17 AM
There are 2 open items independent of each other on this thread.
Issue #1 is the item reported by GUSTOV, which concernings setting the area code / dialer preference. Upon launch of ACT!, this screen constantly comes up.
Issue #2 is an Object Reference error on Server 2008, which is different than the issue started with this thread.